Step 1: Measure and cut 4'x4' birch plywood into six 15"x24" pieces.
Step 2: Use painter’s tape to mask off the edges of each board. (We left a 3" border on all four sides.) Tape across the middle of each board to create the upper 9" square.
Step 3: Paint the upper squares using colors of your choice. Let dry.
Step 2: Use painter’s tape to mask off the edges of each board. (We left a 3" border on all four sides.) Tape across the middle of each board to create the upper 9" square.
Step 3: Paint the upper squares using colors of your choice. Let dry.
Step 4: Remove the tape across the middle and reposition to create a 9" square on the bottom of the board.
Step 5: Paint the lower square. Let dry.
Step 5: Paint the lower square. Let dry.
Step 6: Remove all tape. Seal the board with a water-based Polycrylic finish.
Step 7: Center a self-leveling picture hanger on the back of the board and hang.
Step 7: Center a self-leveling picture hanger on the back of the board and hang.
Posts
No comments:
Post a Comment