Turn a few clay pots and saucers into something special. This tiered stand is inexpensive and easy-to-make. Use it to serve cupcakes, drinks, or quick finger foods.
Step 1: Wrap twine around pot just under the lip of the pot. Tie on a knot. Continue wrapping twine around pot until desired thickness is achieved. Tie end in a knot and cut off excess. Repeat on second pot.
Step 2: Spread glue across the bottom of one pot. Glue pot to center of 10” saucer. Make sure the pot is centered.
Step 3: Spread glue around the rim of the first pot and attach 8” saucer. Make sure saucer is centered.
Step 4: Spread glue across the bottom of second pot. Glue pot to center of 8” saucer. Make sure pot is centered.
Step 5: Spread glue around the rim of the second pot and attach 6” saucer. Make sure saucer is centered.
Step 6: Glue the bottom of finial to the center of the 6” saucer. Make sure finial is centered.
Step 7: Allow entire piece to dry until set, two hours or more.
Step 2: Spread glue across the bottom of one pot. Glue pot to center of 10” saucer. Make sure the pot is centered.
Step 3: Spread glue around the rim of the first pot and attach 8” saucer. Make sure saucer is centered.
Step 4: Spread glue across the bottom of second pot. Glue pot to center of 8” saucer. Make sure pot is centered.
Step 5: Spread glue around the rim of the second pot and attach 6” saucer. Make sure saucer is centered.
Step 6: Glue the bottom of finial to the center of the 6” saucer. Make sure finial is centered.
Step 7: Allow entire piece to dry until set, two hours or more.
Posts
No comments:
Post a Comment